3M QSLV-M8-20 COLD SHRINK INSLTR

130574

Technical Documents

Specifications

Alternate Catalog Number QSLV-M(8-2/0)
American Recovery and Reinvestment Act (ARRA) Compliant X
Brand Name 3M
Buy American Act (BAA) Compliant X
Catalog Description (MFR) 3M Cold Shrink Quick Splice Low Voltage QSLV-M are open-ended tubular rubber sleeves with sealing mastic on each end which are factory expanded and assembled onto a unique three-core system. Two cores, one on each end, are removed after the QSLV-M insulator has been centered over an inline connector, allowing the ends of the tube to shrink and form a water-resistant seal. The third, center segment of the core remains inside the cold shrink tube, acting as a support structure. Sizing of the cores and tube, along with the sealing mastic on each end, is designed to accommodate the variance in connectors and connector crimping techniques and final dimensions without degrading the seal and insulating characteristics of the EPDM rubber tube, while also making core removal easy. Two diameter sizes will cover a range of 1 kV or less cable from 8 AWG through 1000 kcmil for copper and 8 AWG through 500 kcmil for aluminum conductors with crimped connectors. In aerial applications where intense UV radiation will be common and visual inspection is not possible, it is recommended to overwrap the tubing with Scotch Super 33+ Vinyl Electrical Tape or Scotch Self-Fusing Silicone Rubber Electrical Tape 70. Note: Insulator may be used on cable sizes outside of the recommended range provided both cables are within the insulation O.D. range, and the connector meets the dimensional requirements shown in the table.
Commodity Code 6434
Concatenated Invoice Description 3M Cold Shrink Quick Splice Kits QSLV-M
Description 3M QSLV-M8-20 COLD SHRINK INSLTR
Invoice Description (MFR) 3M Cold Shrink Quick Splice Kits QSLV-M Series
Label Description (MFR) 3M(TM) Cold Shrink Quick Splice Low Voltage QSLV-M, 8-2/0
Marketing Message (MFR) The 3M QSLV-M Series Cold Shrink Quick Splice Kit adheres to a one-of-a-kind 3-core system. Simply place the sleeve on a connector and remove 2 of the cores to start splicing. The last core is used to support the structure of the sleeve itself. The factory-expanded tubular sleeve features waterproof sealing mastic tape on each end. This kit is size-configured to adapt to differences in connector sizes, as well as to prevent damage to the seal and insulating aspects. This kit is RoHS 2011/65/EU Compliant and ANSI Certified.
Material Aluminum; Copper
Product Name Cold Shrink Quick Splice
Safety Data Sheet (SDS) Flag Y
Size 1 AWG; 1/0 AWG; 2 AWG; 2/0 AWG; 4 AWG; 6 AWG; 8 AWG
Stripped Catalog Number 7000058804
Type Cold Shrink Splice
UNSPSC 32000000
Voltage Rating 1000V

Availability

  • Akron Qty 0
  • Bedford Qty 0
  • Chardon Qty 0
  • Cleveland Qty 0
  • Lighting Showroom Qty 0
  • Macedonia Qty 0
  • Mayfield Village (current selection) Qty 11
  • Medina Qty 0
  • Middleburg Qty 0
  • Streetsboro Qty 0
  • Westlake Qty 0
  • Willoughby Qty 0
  • Youngstown Qty 0

Recently Viewed Products

You May Also Like