Mersen FEB-11-11 600V 1P FUSEHOLDER SELL QTY OF 1 = 1 BAG/SET OF 2 ENDS
Mersen FEB-11-11 600V 1P FUSEHOLDER SELL QTY OF 1 = 1 BAG/SET OF 2 ENDS
Ferraz Shawmut | ID: 23602
Manufacturer Part Number: FEB-11-11
Technical Documents
Specifications
| Box Quantity | 10 |
| Alternate Catalog Number | FEB-11-11 |
| American Recovery and Reinvestment Act (ARRA) Compliant | X |
| Amperage Rating | 30 A |
| Application | Street lighting Parking lot lighting Traffic signaling Sports lighting Boats and marinas Humid/corrosive environments |
| Brand Name | Mersen |
| Buy American Act (BAA) Compliant | X |
| Catalog Description (MFR) | Mersen's complete line of single and dual pole in-line fuseholders accommodate Midget fuses. The fuseholders are designed for quick installation. Securing nuts or screws are captive thus speeding installation by reducing the need to locate and assemble loose components in the field. Three internal O-rings per pole seal the fuseholder providing a water-resistant compartment for the fuse. The captive O-rings are colored (blue for single pole and red for dual pole) for quick detection. Optional cone shaped insulator boots can be slipped on to provide a watertight seal (breakaway versions come with boots standard). Both single and dual pole versions have an optional breakaway feature which safely disconnects the load in case of a pole knockdown. Fuses remain safely encapsulated within the watertight fuse holder on the load side. Once the pole has been reinstalled the fuseholder can be easily reconnected. 600 Volts 30 Amps 1 pole 11-11 series. |
| Class | Midget |
| Commodity Code | 6131 |
| Concatenated Invoice Description | Fuse Block 600VAC 600VDC Midget 30A 1-Po |
| Connection | Crimp |
| Description | MFZ FEB-11-11 600V 1P FUSEHOLDER SELL QTY OF 1 = 1 BAG/SET OF 2 ENDS |
| Invoice Description (MFR) | Fuse Block 600VAC 600VDC Midget 30A 1-Pole 11-11 Crimp |
| Marketing Message (MFR) | Mersens complete line of single and dual pole in-line fuse holders accommodate either 1-1/2" x 13/32" (10 x 38 mm) midget or Class CC fuses. The fuse holders are designed for quick installation. Securing nuts or screws are captive thus speeding installation by reducing the need to locate and assemble loose components in the field. Three internal O-rings per pole seal the fuse holder providing a waterresistant compartment for the fuse. The captive O-rings are colored (blue for single pole and red for dual pole) for quick detection. Optional cone shaped insulator boots can be slipped on to provide a watertight seal (breakaway versions come with boots standard). Both single and dual pole versions have an optional breakaway feature which safely disconnects the load in case of a pole knockdown. Fuses remain safely encapsulated within the watertight fuse holder on the load side. Once the pole has been reinstalled the fuse holder can be easily reconnected. |
| Mounting | In-Line |
| Phase | 1 Phase |
| Product Name | Midget Fuse Holder |
| Safety Data Sheet (SDS) Flag | N |
| Shipping Restrictions (MFR) | No Shipping Restrictions |
| Short Description | MIDGET FH INLINE 1P 11-11 |
| Size | 4.3 x 1 x 1 in |
| Special Features | Breakaway version quickly disconnects line side during pole knockdown in compliance with state and federal highway commission standards 3 O-rings per pole for water tight applications Colored O-rings for quick detection Single and dual poles Accepts midget or Class CC fuses Wide assortment of terminal variations High heat, impact resistant insulator Captive nut or screw for quick installations Polarized dual pole provides simultaneous disconnection Permanently installed neutral versions quickly identified by white nuts Tulip fuse clip for improved contact and low losses Environmentally friendly-no lead solder used Highly visible catalog number even with insulation boots installed Wire gauge size identified on insulation boots for quick, accurate trimming Time delay for motor starting and transformer inrush |
| Standard | UL Listed Class CC Guide IZLT, File E52283 UL Recognized Component Midget Guide IZLT2, File E52283 CSA Certified Class CC and Midget Class 6225, File 32169 |
| Stripped Catalog Number | FEB1111 |
| Substitutes | 570595 |
| Type | UL/CSA Fuse Bases |
| UNSPSC | 39121624 |
| Voltage Rating | 600V |
Availability
- Akron Qty 7
- Bedford Qty 0
- Chardon Qty 0
- Cleveland Qty 8
- Lighting Showroom Qty 0
- Macedonia Qty 6
- Mayfield Village (current selection) Qty 18
- Medina Qty 0
- Middleburg Qty 0
- Streetsboro Qty 0
- Westlake Qty 7
- Willoughby Qty 1
- Youngstown Qty 10